Hornet Tattoo

AUA'Fee® PRO SENSITIV with Arnica - Tattoo Butter for Use During Tattooing (125 ml) AUA'Fee® PRO SENSITIV Arnica is a natural tattoo butter from Austria— developed for use during tattooing and for sensitive skin. With highly concentrated Arnica montana flower extract and white frankincense , it has an astringent effect: It is designed to reduce heavy bleeding, protect the skin during the tattooing process, and minimize pigment washout and redness . 125 ml. At a glance: Brand / Model: AUA'Fee® PRO SENSITIV with Arnica (Manufacturer SKU INK0025) Type: Tattoo butter for use during the tattooing process (“During Butter”) Contents: 125 ml Main active ingredients: Arnica montana flower extract, white frankincense (Boswellia sacra) Formulation: natural, based on plant-derived butters and oils Mechanism of action: astringent—protects the skin, reduces heavy bleeding, redness, and pigment loss Origin: Austria (AUA'Fee®) Usage: When applied during marking, the butter forms a protective film and has an astringent effect. The goal: to control clear wound fluid and heavy bleeding so that pigments are not washed out and the skin is protected during the tattooing process. Compared to AUA'Fee® SENSITIV SKIN CARE, the ingredients are significantly more concentrated so that they can take full effect during tattooing. Important Note on Distinction: PRO SENSITIV (Arnica) is a product for use during the tattooing session, not a healing product. It is not intended for the healing process of a tattoo, which can last from several days to several weeks—a dedicated aftercare product (e.g., AUA'Fee® SENSITIV SKIN CARE) is intended for that purpose. Ingredients and Skin: The formula is plant-based: shea butter, coconut, olive, and sunflower oils as a carrier base, vitamin E (tocopherol), white frankincense, and arnica as active ingredients. Arnica is traditionally known for soothing the skin and tissues and supporting regeneration. White frankincense (Boswellia sacra) is traditionally valued for its soothing and antioxidant properties. A practical note: Arnica belongs to the Asteraceae family. If you have a known allergy to plants in the Asteraceae family, you should avoid this product or test it on an inconspicuous area first. The formula also contains limonene (a fragrance ingredient subject to labeling requirements). Ingredients (INCI): Butyrospermum Parkii Butter, Cocos Nucifera Oil, Olea Europaea Fruit Oil, Boswellia Sacra Gum/Resin Extract, Tocopherol, Helianthus Annuus Seed Oil, Limonene, Arnica Montana Extract. FAQ: Should I use the butter during or after tattooing? During. It has an astringent effect during the tattooing process, protects the skin, and is intended to reduce bleeding, redness, and pigment washout. It is not intended for actual aftercare. What is arnica doing here? Arnica is the main active ingredient and is traditionally known for its soothing, regenerative properties—complemented by white frankincense. Is the butter natural? Yes, it’s formulated as a natural tattoo butter based on plant-derived butters and oils (see INCI). How does it differ from the SENSITIV SKIN CARE line? In terms of concentration: PRO SENSITIV is significantly more concentrated and is intended for use during the tattooing process, not for healing. Who should not use it? Avoid if you have a known allergy to the Asteraceae family, or test it first. Contains limonene.

Microbeau E.L.B. - PMU machine with adjustable stroke (2.2–3.4 mm), 4 finishes Your gateway to permanent makeup—without compromising on control. The Microbeau E.L.B. is a beginner-friendly PMU machine that offers features usually reserved for more expensive models: An adjustable stroke from 2.2 to 3.4 mm, a color display, and a smooth-running, core-less motor. Reliable for daily practice, versatile for brows, eyeliner, and lips— available in four finishes: Blush Pink, Matte Black, Cascade Blue, and Smokey Quartz. At a Glance Brand / Model: Microbeau E.L.B. (PMU machine with adjustable stroke) Finishes: Blush Pink, Matte Black, Cascade Blue, Smokey Quartz (selectable variants) Adjustable stroke: 2.2–3.4 mm in 0.2-mm increments, with marked, secure locking positions Display: 0.96″ TFT color display Motor: brushless, coreless, low-vibration Memory: 3 programmable memory slots Operation: cordless (1500 mAh battery, min. 3 h) or corded via the included RCA module Voltage: 3–12 V in 0.1-V increments, frequency 50–173 Hz, 3,000–10,380 rpm Dimensions: 128 g (with battery), length 124 mm, handle 22–29 mm Cartridges: compatible with universal PMU needle modules One stroke for the whole look The heart of the machine is the adjustable stroke. From 2.2 mm to 3.4 mm in fine 0.2-mm increments, you can adjust the needle stroke directly on the machine—the positions are clearly marked and lock securely into place. A shorter stroke for soft shading and gradients, such as with Ombré Powder Brows; a longer stroke for defined lines and rich saturation, such as for lips and eyeliner. Plus, there are 3 programmable memory slots: save your settings for brows, lips, and liner once, and recall them immediately the next time you use the machine. Everything at a glance, steady in your hand The 0.96″ TFT color display clearly shows your setup during the treatment—no guessing, quick readjustments. The brushless, core-less motor runs with minimal vibration, reducing unnecessary strain on the skin—especially in sensitive areas like the eyelid margins and lip contours. Weighing 128 g including the battery, with a length of 124 mm and a grip diameter of 22–29 mm, the E.L.B. feels light and well-balanced in your hand, even during longer practice sessions. Cordless or plugged in You decide how you work: The rechargeable 1500-mAh battery provides at least 3 hours of cordless power and recharges in about 2 hours. If you’d rather work with the AC adapter, simply plug in the included RCA module and use it with a cord. Both are included—no additional purchases needed. Built for beginners The E.L.B. is deliberately designed as a reliable, easy-to-control machine for those new to PMU—ideal for students, for training, and for academies equipping workstations. Because it works with universal PMU needle modules, you can set up your first setup without worrying about compatibility. In short: true control over stroke, voltage, and frequency at an entry-level price. What the E.L.B. is built for Eyebrows, eyeliner, and lips—all in one machine, tailored via the adjustable stroke. The machine works on various skin types. What’sIncluded Rechargeable battery RCA module and RCA cable USB-C cable Repair kit Quick Start Guide Technical Specifications (apply to all finishes) Adjustable hub: 2.2–3.4 mm (0.2 mm increments), marked locking positions Display: 0.96″ TFT color display Motor: brushless, coreless, low-vibration Voltage range: 3–12 V (0.1-V increments) Frequency range: 50–173 Hz Speed: 3,000–10,380 rpm Memory: 3 programmable memory slots Battery: 1,500 mAh, at least 3 hours of cordless use, charging time approx. 2 hours Weight (with battery): 128 g Length: 124 mm Width / Handle: 22–29 mm Needle modules: compatible with universal PMU cartridges Secure needle module holder Suitable for eyebrow, eyeliner, and lip procedures; various skin types

Microbeau E.L.B. - PMU machine with adjustable stroke (2.2–3.4 mm), 4 finishes Your gateway to permanent makeup—without compromising on control. The Microbeau E.L.B. is a beginner-friendly PMU machine that offers features usually reserved for more expensive models: An adjustable stroke from 2.2 to 3.4 mm, a color display, and a smooth-running, core-less motor. Reliable for daily practice, versatile for brows, eyeliner, and lips— available in four finishes: Blush Pink, Matte Black, Cascade Blue, and Smokey Quartz. At a Glance Brand / Model: Microbeau E.L.B. (PMU machine with adjustable stroke) Finishes: Blush Pink, Matte Black, Cascade Blue, Smokey Quartz (selectable variants) Adjustable stroke: 2.2–3.4 mm in 0.2-mm increments, with marked, secure locking positions Display: 0.96″ TFT color display Motor: brushless, coreless, low-vibration Memory: 3 programmable memory slots Operation: cordless (1500 mAh battery, min. 3 h) or corded via the included RCA module Voltage: 3–12 V in 0.1-V increments, frequency 50–173 Hz, 3,000–10,380 rpm Dimensions: 128 g (with battery), length 124 mm, handle 22–29 mm Cartridges: compatible with universal PMU needle modules One stroke for the whole look The heart of the machine is the adjustable stroke. From 2.2 mm to 3.4 mm in fine 0.2-mm increments, you can adjust the needle stroke directly on the machine—the positions are clearly marked and lock securely into place. A shorter stroke for soft shading and gradients, such as with Ombré Powder Brows; a longer stroke for defined lines and rich saturation, such as for lips and eyeliner. Plus, there are 3 programmable memory slots: save your settings for brows, lips, and liner once, and recall them immediately the next time you use the machine. Everything at a glance, steady in your hand The 0.96″ TFT color display clearly shows your setup during the treatment—no guessing, quick readjustments. The brushless, core-less motor runs with minimal vibration, reducing unnecessary strain on the skin—especially in sensitive areas like the eyelid margins and lip contours. Weighing 128 g including the battery, with a length of 124 mm and a grip diameter of 22–29 mm, the E.L.B. feels light and well-balanced in your hand, even during longer practice sessions. Cordless or plugged in You decide how you work: The rechargeable 1500-mAh battery provides at least 3 hours of cordless power and recharges in about 2 hours. If you’d rather work with the AC adapter, simply plug in the included RCA module and use it with a cord. Both are included—no additional purchases needed. Built for beginners The E.L.B. is deliberately designed as a reliable, easy-to-control machine for those new to PMU—ideal for students, for training, and for academies equipping workstations. Because it works with universal PMU needle modules, you can set up your first setup without worrying about compatibility. In short: true control over stroke, voltage, and frequency at an entry-level price. What the E.L.B. is built for Eyebrows, eyeliner, and lips—all in one machine, tailored via the adjustable stroke. The machine works on various skin types. What’sIncluded Rechargeable battery RCA module and RCA cable USB-C cable Repair kit Quick Start Guide Technical Specifications (apply to all finishes) Adjustable hub: 2.2–3.4 mm (0.2 mm increments), marked locking positions Display: 0.96″ TFT color display Motor: brushless, coreless, low-vibration Voltage range: 3–12 V (0.1-V increments) Frequency range: 50–173 Hz Speed: 3,000–10,380 rpm Memory: 3 programmable memory slots Battery: 1,500 mAh, at least 3 hours of cordless use, charging time approx. 2 hours Weight (with battery): 128 g Length: 124 mm Width / Handle: 22–29 mm Needle modules: compatible with universal PMU cartridges Secure needle module holder Suitable for eyebrow, eyeliner, and lip procedures; various skin types

Microbeau E.L.B. - PMU machine with adjustable stroke (2.2–3.4 mm), 4 finishes Your gateway to permanent makeup—without compromising on control. The Microbeau E.L.B. is a beginner-friendly PMU machine that offers features usually reserved for more expensive models: An adjustable stroke from 2.2 to 3.4 mm, a color display, and a smooth-running, core-less motor. Reliable for daily practice, versatile for brows, eyeliner, and lips— available in four finishes: Blush Pink, Matte Black, Cascade Blue, and Smokey Quartz. At a Glance Brand / Model: Microbeau E.L.B. (PMU machine with adjustable stroke) Finishes: Blush Pink, Matte Black, Cascade Blue, Smokey Quartz (selectable variants) Adjustable stroke: 2.2–3.4 mm in 0.2-mm increments, with marked, secure locking positions Display: 0.96″ TFT color display Motor: brushless, coreless, low-vibration Memory: 3 programmable memory slots Operation: cordless (1500 mAh battery, min. 3 h) or corded via the included RCA module Voltage: 3–12 V in 0.1-V increments, frequency 50–173 Hz, 3,000–10,380 rpm Dimensions: 128 g (with battery), length 124 mm, handle 22–29 mm Cartridges: compatible with universal PMU needle modules One stroke for the whole look The heart of the machine is the adjustable stroke. From 2.2 mm to 3.4 mm in fine 0.2-mm increments, you can adjust the needle stroke directly on the machine—the positions are clearly marked and lock securely into place. A shorter stroke for soft shading and gradients, such as with Ombré Powder Brows; a longer stroke for defined lines and rich saturation, such as for lips and eyeliner. Plus, there are 3 programmable memory slots: save your settings for brows, lips, and liner once, and recall them immediately the next time you use the machine. Everything at a glance, steady in your hand The 0.96″ TFT color display clearly shows your setup during the treatment—no guessing, quick readjustments. The brushless, core-less motor runs with minimal vibration, reducing unnecessary strain on the skin—especially in sensitive areas like the eyelid margins and lip contours. Weighing 128 g including the battery, with a length of 124 mm and a grip diameter of 22–29 mm, the E.L.B. feels light and well-balanced in your hand, even during longer practice sessions. Cordless or plugged in You decide how you work: The rechargeable 1500-mAh battery provides at least 3 hours of cordless power and recharges in about 2 hours. If you’d rather work with the AC adapter, simply plug in the included RCA module and use it with a cord. Both are included—no additional purchases needed. Built for beginners The E.L.B. is deliberately designed as a reliable, easy-to-control machine for those new to PMU—ideal for students, for training, and for academies equipping workstations. Because it works with universal PMU needle modules, you can set up your first setup without worrying about compatibility. In short: true control over stroke, voltage, and frequency at an entry-level price. What the E.L.B. is built for Eyebrows, eyeliner, and lips—all in one machine, tailored via the adjustable stroke. The machine works on various skin types. What’sIncluded Rechargeable battery RCA module and RCA cable USB-C cable Repair kit Quick Start Guide Technical Specifications (apply to all finishes) Adjustable hub: 2.2–3.4 mm (0.2 mm increments), marked locking positions Display: 0.96″ TFT color display Motor: brushless, coreless, low-vibration Voltage range: 3–12 V (0.1-V increments) Frequency range: 50–173 Hz Speed: 3,000–10,380 rpm Memory: 3 programmable memory slots Battery: 1,500 mAh, at least 3 hours of cordless use, charging time approx. 2 hours Weight (with battery): 128 g Length: 124 mm Width / Handle: 22–29 mm Needle modules: compatible with universal PMU cartridges Secure needle module holder Suitable for eyebrow, eyeliner, and lip procedures; various skin types

Microbeau E.L.B. - PMU machine with adjustable stroke (2.2–3.4 mm), 4 finishes Your gateway to permanent makeup—without compromising on control. The Microbeau E.L.B. is a beginner-friendly PMU machine that offers features usually reserved for more expensive models: An adjustable stroke from 2.2 to 3.4 mm, a color display, and a smooth-running, core-less motor. Reliable for daily practice, versatile for brows, eyeliner, and lips— available in four finishes: Blush Pink, Matte Black, Cascade Blue, and Smokey Quartz. At a Glance Brand / Model: Microbeau E.L.B. (PMU machine with adjustable stroke) Finishes: Blush Pink, Matte Black, Cascade Blue, Smokey Quartz (selectable variants) Adjustable stroke: 2.2–3.4 mm in 0.2-mm increments, with marked, secure locking positions Display: 0.96″ TFT color display Motor: brushless, coreless, low-vibration Memory: 3 programmable memory slots Operation: cordless (1500 mAh battery, min. 3 h) or corded via the included RCA module Voltage: 3–12 V in 0.1-V increments, frequency 50–173 Hz, 3,000–10,380 rpm Dimensions: 128 g (with battery), length 124 mm, handle 22–29 mm Cartridges: compatible with universal PMU needle modules One stroke for the whole look The heart of the machine is the adjustable stroke. From 2.2 mm to 3.4 mm in fine 0.2-mm increments, you can adjust the needle stroke directly on the machine—the positions are clearly marked and lock securely into place. A shorter stroke for soft shading and gradients, such as with Ombré Powder Brows; a longer stroke for defined lines and rich saturation, such as for lips and eyeliner. Plus, there are 3 programmable memory slots: save your settings for brows, lips, and liner once, and recall them immediately the next time you use the machine. Everything at a glance, steady in your hand The 0.96″ TFT color display clearly shows your setup during the treatment—no guessing, quick readjustments. The brushless, core-less motor runs with minimal vibration, reducing unnecessary strain on the skin—especially in sensitive areas like the eyelid margins and lip contours. Weighing 128 g including the battery, with a length of 124 mm and a grip diameter of 22–29 mm, the E.L.B. feels light and well-balanced in your hand, even during longer practice sessions. Cordless or plugged in You decide how you work: The rechargeable 1500-mAh battery provides at least 3 hours of cordless power and recharges in about 2 hours. If you’d rather work with the AC adapter, simply plug in the included RCA module and use it with a cord. Both are included—no additional purchases needed. Built for beginners The E.L.B. is deliberately designed as a reliable, easy-to-control machine for those new to PMU—ideal for students, for training, and for academies equipping workstations. Because it works with universal PMU needle modules, you can set up your first setup without worrying about compatibility. In short: true control over stroke, voltage, and frequency at an entry-level price. What the E.L.B. is built for Eyebrows, eyeliner, and lips—all in one machine, tailored via the adjustable stroke. The machine works on various skin types. What’sIncluded Rechargeable battery RCA module and RCA cable USB-C cable Repair kit Quick Start Guide Technical Specifications (apply to all finishes) Adjustable hub: 2.2–3.4 mm (0.2 mm increments), marked locking positions Display: 0.96″ TFT color display Motor: brushless, coreless, low-vibration Voltage range: 3–12 V (0.1-V increments) Frequency range: 50–173 Hz Speed: 3,000–10,380 rpm Memory: 3 programmable memory slots Battery: 1,500 mAh, at least 3 hours of cordless use, charging time approx. 2 hours Weight (with battery): 128 g Length: 124 mm Width / Handle: 22–29 mm Needle modules: compatible with universal PMU cartridges Secure needle module holder Suitable for eyebrow, eyeliner, and lip procedures; various skin types

Microbeau E.L.B. - PMU machine with adjustable stroke (2.2–3.4 mm), 4 finishes Your gateway to permanent makeup—without compromising on control. The Microbeau E.L.B. is a beginner-friendly PMU machine that offers features usually reserved for more expensive models: An adjustable stroke from 2.2 to 3.4 mm, a color display, and a smooth-running, core-less motor. Reliable for daily practice, versatile for brows, eyeliner, and lips— available in four finishes: Blush Pink, Matte Black, Cascade Blue, and Smokey Quartz. At a Glance Brand / Model: Microbeau E.L.B. (PMU machine with adjustable stroke) Finishes: Blush Pink, Matte Black, Cascade Blue, Smokey Quartz (selectable variants) Adjustable stroke: 2.2–3.4 mm in 0.2-mm increments, with marked, secure locking positions Display: 0.96″ TFT color display Motor: brushless, coreless, low-vibration Memory: 3 programmable memory slots Operation: cordless (1500 mAh battery, min. 3 h) or corded via the included RCA module Voltage: 3–12 V in 0.1-V increments, frequency 50–173 Hz, 3,000–10,380 rpm Dimensions: 128 g (with battery), length 124 mm, handle 22–29 mm Cartridges: compatible with universal PMU needle modules One stroke for the whole look The heart of the machine is the adjustable stroke. From 2.2 mm to 3.4 mm in fine 0.2-mm increments, you can adjust the needle stroke directly on the machine—the positions are clearly marked and lock securely into place. A shorter stroke for soft shading and gradients, such as with Ombré Powder Brows; a longer stroke for defined lines and rich saturation, such as for lips and eyeliner. Plus, there are 3 programmable memory slots: save your settings for brows, lips, and liner once, and recall them immediately the next time you use the machine. Everything at a glance, steady in your hand The 0.96″ TFT color display clearly shows your setup during the treatment—no guessing, quick readjustments. The brushless, core-less motor runs with minimal vibration, reducing unnecessary strain on the skin—especially in sensitive areas like the eyelid margins and lip contours. Weighing 128 g including the battery, with a length of 124 mm and a grip diameter of 22–29 mm, the E.L.B. feels light and well-balanced in your hand, even during longer practice sessions. Cordless or plugged in You decide how you work: The rechargeable 1500-mAh battery provides at least 3 hours of cordless power and recharges in about 2 hours. If you’d rather work with the AC adapter, simply plug in the included RCA module and use it with a cord. Both are included—no additional purchases needed. Built for beginners The E.L.B. is deliberately designed as a reliable, easy-to-control machine for those new to PMU—ideal for students, for training, and for academies equipping workstations. Because it works with universal PMU needle modules, you can set up your first setup without worrying about compatibility. In short: true control over stroke, voltage, and frequency at an entry-level price. What the E.L.B. is built for Eyebrows, eyeliner, and lips—all in one machine, tailored via the adjustable stroke. The machine works on various skin types. What’sIncluded Rechargeable battery RCA module and RCA cable USB-C cable Repair kit Quick Start Guide Technical Specifications (apply to all finishes) Adjustable hub: 2.2–3.4 mm (0.2 mm increments), marked locking positions Display: 0.96″ TFT color display Motor: brushless, coreless, low-vibration Voltage range: 3–12 V (0.1-V increments) Frequency range: 50–173 Hz Speed: 3,000–10,380 rpm Memory: 3 programmable memory slots Battery: 1,500 mAh, at least 3 hours of cordless use, charging time approx. 2 hours Weight (with battery): 128 g Length: 124 mm Width / Handle: 22–29 mm Needle modules: compatible with universal PMU cartridges Secure needle module holder Suitable for eyebrow, eyeliner, and lip procedures; various skin types

FK Irons One Update - Wireless Tattoo Machine, 3 Finishes, 3 & 4 mm Stroke (Made in the USA) Cordless, coreless, easy to read. The FK Irons One Update is the redesigned FK ONE—featuring a 1.1″ digital LCD, a brushed coreless motor, and two drop-in batteries that together provide up to 12 hours of tattooing time. Housing made of 6061-T6 aluminum, manufactured in the USA, with voltage adjustable in fine 0.2-V increments. You choose your finish— Stealth, Gunmetal, or Pop Pink —and the stroke length: 3 mm or 4 mm. Built for long sessions that won’t slow you down. At a Glance Brand / Model: FK Irons One Update (cordless pen machine) Finishes: Stealth, Gunmetal, Pop Pink (selectable as a variant) Stroke: 3 mm or 4 mm, fixed stroke length (selectable as a variant) Motor: brushed coreless motor—ultra-smooth operation Display: 1.1″ LCD clearly shows the settings Battery: two drop-in cells—short (18500A) and long (18650GA) Run time: short battery up to 5.5 hours, long battery up to 6.5 hours, combined up to ~12 hours Voltage: 5–12 V, adjustable in 0.2-V increments Frequency: 80–180 Hz, speed 4,800–10,800 rpm Grips: compatible with FK ErgoShield grips Material: 6061-T6 aluminum, Made in the USA What’s new compared to the FK One This updated version focuses precisely on the features that matter most in everyday use. Instead of a simple LED display, you can now read your settings on a 1.1″ LCD screen. The brushed, core-less motor runs exceptionally quietly and smoothly. Two drop-in batteries—one short and one long—noticeably extend your session time, and you can adjust the voltage in fine 0.2-V increments instead of rough jumps. Plus, it’s compatible with ErgoShield grips. 3 mm or 4 mm stroke—which one is right for you? The One Update is available in two versions with fixed stroke lengths. The shorter 3-mm stroke feels gentler on the skin and really shines when it comes to shading, color gradients, and black-and-gray work. The longer 4-mm stroke provides more impact and is suitable for bold outlines and heavy packing. Those who primarily tattoo in one direction should choose accordingly; many artists purchase both stroke lengths for different types of work. What this means in practice The wide operating range—80 to 180 Hz and 4,800 to 10,800 RPM at 5 to 12 V—covers lines, shading, and filling in areas. The 0.2-V increments give you finer control over the stroke, especially when transitioning from lining to whip shading. The coreless motor ensures smooth, low-vibration operation, which is easy on your hand even after hours of use. And because you’re working with two batteries, you can simply swap them out when one runs low and keep tattooing instead of waiting for it to charge. FK-One users consistently praise the series’ ease of use and versatility. The Update version is new on the market and continues this line with the upgrades mentioned—reliable real-world experience specifically with the Update is just beginning to accumulate. Technical Specifications (apply to all finishes and both stroke lengths) Finishes: Stealth, Gunmetal, Pop Pink Travel: 3 mm or 4 mm (fixed, as a variant) Material: 6061-T6 aluminum Display: 1.1″ LCD Batteries: 2 dual drop-in cells (18500A & 18650GA) Battery capacity: short battery 2,000 mAh, long battery 3,300 mAh Run time (short battery): up to 5.5 hours (depending on settings) Battery life (long battery): up to 6.5 hours (depending on settings) Maximum average runtime: up to 12 hours (depending on battery and settings) Voltage range: 5–12 V, in 0.2-V increments Frequency range: 80–180 Hz Motor: brushed coreless motor Speed range: 4,800–10,800 rpm Weight with long battery: 233 g Weight with short battery: 215 g Length with long battery: 136 mm Length with short battery: 127 mm Maximum width: 38 mm Compatible with FK ErgoShield Grip Made in the USA Package Contents 2 drop-in batteries (short & long) eFest Slim K2 charger USB-C cable Travel case Category The One Update is the wireless all-rounder for all techniques. If you want to adjust the stroke while the machine is running, the FK One Adjust with its wheel-adjustable stroke is the alternative. If you’re looking for a clearly readable, smooth-running wireless machine with long battery life and precise voltage control, you’ve come to the right place. FAQ What colors and stroke lengths are available? Three finishes—Stealth, Gunmetal, and Pop Pink—each with a fixed stroke length of 3 mm or 4 mm. You can select either option in the variant. 3 mm or 4 mm—which should I choose? A shorter 3-mm stroke for smoother shading, gradients, and black-and-gray work; a longer 4-mm stroke for rich outlines and bold filling. What sets the updated version apart from the original FK One? New features include the 1.1″ LCD, two drop-in batteries with longer runtime, voltage control in 0.2-V increments, the brushed coreless motor, and ErgoShield compatibility. How long does the battery last? The short batterylasts up to 5.5 hours, the long one up to 6.5 hours; combined, up to about 12 hours—depending on the settings. Can I adjust the stroke while the device is running? No. The One Update has a fixed stroke length (3 or 4 mm). The FK One Adjust offers an adjustable stroke. Which grips are compatible, and where is it manufactured? Compatible with FK ErgoShield grips; housing made of 6061-T6 aluminum, manufactured in the USA.

FK Irons One Update - Wireless Tattoo Machine, 3 Finishes, 3 & 4 mm Stroke (Made in the USA) Cordless, coreless, easy to read. The FK Irons One Update is the redesigned FK ONE—featuring a 1.1″ digital LCD, a brushed coreless motor, and two drop-in batteries that together provide up to 12 hours of tattooing time. Housing made of 6061-T6 aluminum, manufactured in the USA, with voltage adjustable in fine 0.2-V increments. You choose your finish— Stealth, Gunmetal, or Pop Pink —and the stroke length: 3 mm or 4 mm. Built for long sessions that won’t slow you down. At a Glance Brand / Model: FK Irons One Update (cordless pen machine) Finishes: Stealth, Gunmetal, Pop Pink (selectable as a variant) Stroke: 3 mm or 4 mm, fixed stroke length (selectable as a variant) Motor: brushed coreless motor—ultra-smooth operation Display: 1.1″ LCD clearly shows the settings Battery: two drop-in cells—short (18500A) and long (18650GA) Run time: short battery up to 5.5 hours, long battery up to 6.5 hours, combined up to ~12 hours Voltage: 5–12 V, adjustable in 0.2-V increments Frequency: 80–180 Hz, speed 4,800–10,800 rpm Grips: compatible with FK ErgoShield grips Material: 6061-T6 aluminum, Made in the USA What’s new compared to the FK One This updated version focuses precisely on the features that matter most in everyday use. Instead of a simple LED display, you can now read your settings on a 1.1″ LCD screen. The brushed, core-less motor runs exceptionally quietly and smoothly. Two drop-in batteries—one short and one long—noticeably extend your session time, and you can adjust the voltage in fine 0.2-V increments instead of rough jumps. Plus, it’s compatible with ErgoShield grips. 3 mm or 4 mm stroke—which one is right for you? The One Update is available in two versions with fixed stroke lengths. The shorter 3-mm stroke feels gentler on the skin and really shines when it comes to shading, color gradients, and black-and-gray work. The longer 4-mm stroke provides more impact and is suitable for bold outlines and heavy packing. Those who primarily tattoo in one direction should choose accordingly; many artists purchase both stroke lengths for different types of work. What this means in practice The wide operating range—80 to 180 Hz and 4,800 to 10,800 RPM at 5 to 12 V—covers lines, shading, and filling in areas. The 0.2-V increments give you finer control over the stroke, especially when transitioning from lining to whip shading. The coreless motor ensures smooth, low-vibration operation, which is easy on your hand even after hours of use. And because you’re working with two batteries, you can simply swap them out when one runs low and keep tattooing instead of waiting for it to charge. FK-One users consistently praise the series’ ease of use and versatility. The Update version is new on the market and continues this line with the upgrades mentioned—reliable real-world experience specifically with the Update is just beginning to accumulate. Technical Specifications (apply to all finishes and both stroke lengths) Finishes: Stealth, Gunmetal, Pop Pink Travel: 3 mm or 4 mm (fixed, as a variant) Material: 6061-T6 aluminum Display: 1.1″ LCD Batteries: 2 dual drop-in cells (18500A & 18650GA) Battery capacity: short battery 2,000 mAh, long battery 3,300 mAh Run time (short battery): up to 5.5 hours (depending on settings) Battery life (long battery): up to 6.5 hours (depending on settings) Maximum average runtime: up to 12 hours (depending on battery and settings) Voltage range: 5–12 V, in 0.2-V increments Frequency range: 80–180 Hz Motor: brushed coreless motor Speed range: 4,800–10,800 rpm Weight with long battery: 233 g Weight with short battery: 215 g Length with long battery: 136 mm Length with short battery: 127 mm Maximum width: 38 mm Compatible with FK ErgoShield Grip Made in the USA Package Contents 2 drop-in batteries (short & long) eFest Slim K2 charger USB-C cable Travel case Category The One Update is the wireless all-rounder for all techniques. If you want to adjust the stroke while the machine is running, the FK One Adjust with its wheel-adjustable stroke is the alternative. If you’re looking for a clearly readable, smooth-running wireless machine with long battery life and precise voltage control, you’ve come to the right place. FAQ What colors and stroke lengths are available? Three finishes—Stealth, Gunmetal, and Pop Pink—each with a fixed stroke length of 3 mm or 4 mm. You can select either option in the variant. 3 mm or 4 mm—which should I choose? A shorter 3-mm stroke for smoother shading, gradients, and black-and-gray work; a longer 4-mm stroke for rich outlines and bold filling. What sets the updated version apart from the original FK One? New features include the 1.1″ LCD, two drop-in batteries with longer runtime, voltage control in 0.2-V increments, the brushed coreless motor, and ErgoShield compatibility. How long does the battery last? The short batterylasts up to 5.5 hours, the long one up to 6.5 hours; combined, up to about 12 hours—depending on the settings. Can I adjust the stroke while the device is running? No. The One Update has a fixed stroke length (3 or 4 mm). The FK One Adjust offers an adjustable stroke. Which grips are compatible, and where is it manufactured? Compatible with FK ErgoShield grips; housing made of 6061-T6 aluminum, manufactured in the USA.

FK Irons One Update - Wireless Tattoo Machine, 3 Finishes, 3 & 4 mm Stroke (Made in the USA) Cordless, coreless, easy to read. The FK Irons One Update is the redesigned FK ONE—featuring a 1.1″ digital LCD, a brushed coreless motor, and two drop-in batteries that together provide up to 12 hours of tattooing time. Housing made of 6061-T6 aluminum, manufactured in the USA, with voltage adjustable in fine 0.2-V increments. You choose your finish— Stealth, Gunmetal, or Pop Pink —and the stroke length: 3 mm or 4 mm. Built for long sessions that won’t slow you down. At a Glance Brand / Model: FK Irons One Update (cordless pen machine) Finishes: Stealth, Gunmetal, Pop Pink (selectable as a variant) Stroke: 3 mm or 4 mm, fixed stroke length (selectable as a variant) Motor: brushed coreless motor—ultra-smooth operation Display: 1.1″ LCD clearly shows the settings Battery: two drop-in cells—short (18500A) and long (18650GA) Run time: short battery up to 5.5 hours, long battery up to 6.5 hours, combined up to ~12 hours Voltage: 5–12 V, adjustable in 0.2-V increments Frequency: 80–180 Hz, speed 4,800–10,800 rpm Grips: compatible with FK ErgoShield grips Material: 6061-T6 aluminum, Made in the USA What’s new compared to the FK One This updated version focuses precisely on the features that matter most in everyday use. Instead of a simple LED display, you can now read your settings on a 1.1″ LCD screen. The brushed, core-less motor runs exceptionally quietly and smoothly. Two drop-in batteries—one short and one long—noticeably extend your session time, and you can adjust the voltage in fine 0.2-V increments instead of rough jumps. Plus, it’s compatible with ErgoShield grips. 3 mm or 4 mm stroke—which one is right for you? The One Update is available in two versions with fixed stroke lengths. The shorter 3-mm stroke feels gentler on the skin and really shines when it comes to shading, color gradients, and black-and-gray work. The longer 4-mm stroke provides more impact and is suitable for bold outlines and heavy packing. Those who primarily tattoo in one direction should choose accordingly; many artists purchase both stroke lengths for different types of work. What this means in practice The wide operating range—80 to 180 Hz and 4,800 to 10,800 RPM at 5 to 12 V—covers lines, shading, and filling in areas. The 0.2-V increments give you finer control over the stroke, especially when transitioning from lining to whip shading. The coreless motor ensures smooth, low-vibration operation, which is easy on your hand even after hours of use. And because you’re working with two batteries, you can simply swap them out when one runs low and keep tattooing instead of waiting for it to charge. FK-One users consistently praise the series’ ease of use and versatility. The Update version is new on the market and continues this line with the upgrades mentioned—reliable real-world experience specifically with the Update is just beginning to accumulate. Technical Specifications (apply to all finishes and both stroke lengths) Finishes: Stealth, Gunmetal, Pop Pink Travel: 3 mm or 4 mm (fixed, as a variant) Material: 6061-T6 aluminum Display: 1.1″ LCD Batteries: 2 dual drop-in cells (18500A & 18650GA) Battery capacity: short battery 2,000 mAh, long battery 3,300 mAh Run time (short battery): up to 5.5 hours (depending on settings) Battery life (long battery): up to 6.5 hours (depending on settings) Maximum average runtime: up to 12 hours (depending on battery and settings) Voltage range: 5–12 V, in 0.2-V increments Frequency range: 80–180 Hz Motor: brushed coreless motor Speed range: 4,800–10,800 rpm Weight with long battery: 233 g Weight with short battery: 215 g Length with long battery: 136 mm Length with short battery: 127 mm Maximum width: 38 mm Compatible with FK ErgoShield Grip Made in the USA Package Contents 2 drop-in batteries (short & long) eFest Slim K2 charger USB-C cable Travel case Category The One Update is the wireless all-rounder for all techniques. If you want to adjust the stroke while the machine is running, the FK One Adjust with its wheel-adjustable stroke is the alternative. If you’re looking for a clearly readable, smooth-running wireless machine with long battery life and precise voltage control, you’ve come to the right place. FAQ What colors and stroke lengths are available? Three finishes—Stealth, Gunmetal, and Pop Pink—each with a fixed stroke length of 3 mm or 4 mm. You can select either option in the variant. 3 mm or 4 mm—which should I choose? A shorter 3-mm stroke for smoother shading, gradients, and black-and-gray work; a longer 4-mm stroke for rich outlines and bold filling. What sets the updated version apart from the original FK One? New features include the 1.1″ LCD, two drop-in batteries with longer runtime, voltage control in 0.2-V increments, the brushed coreless motor, and ErgoShield compatibility. How long does the battery last? The short batterylasts up to 5.5 hours, the long one up to 6.5 hours; combined, up to about 12 hours—depending on the settings. Can I adjust the stroke while the device is running? No. The One Update has a fixed stroke length (3 or 4 mm). The FK One Adjust offers an adjustable stroke. Which grips are compatible, and where is it manufactured? Compatible with FK ErgoShield grips; housing made of 6061-T6 aluminum, manufactured in the USA.

FK Irons One Update - Wireless Tattoo Machine, 3 Finishes, 3 & 4 mm Stroke (Made in the USA) Cordless, coreless, easy to read. The FK Irons One Update is the redesigned FK ONE—featuring a 1.1″ digital LCD, a brushed coreless motor, and two drop-in batteries that together provide up to 12 hours of tattooing time. Housing made of 6061-T6 aluminum, manufactured in the USA, with voltage adjustable in fine 0.2-V increments. You choose your finish— Stealth, Gunmetal, or Pop Pink —and the stroke length: 3 mm or 4 mm. Built for long sessions that won’t slow you down. At a Glance Brand / Model: FK Irons One Update (cordless pen machine) Finishes: Stealth, Gunmetal, Pop Pink (selectable as a variant) Stroke: 3 mm or 4 mm, fixed stroke length (selectable as a variant) Motor: brushed coreless motor—ultra-smooth operation Display: 1.1″ LCD clearly shows the settings Battery: two drop-in cells—short (18500A) and long (18650GA) Run time: short battery up to 5.5 hours, long battery up to 6.5 hours, combined up to ~12 hours Voltage: 5–12 V, adjustable in 0.2-V increments Frequency: 80–180 Hz, speed 4,800–10,800 rpm Grips: compatible with FK ErgoShield grips Material: 6061-T6 aluminum, Made in the USA What’s new compared to the FK One This updated version focuses precisely on the features that matter most in everyday use. Instead of a simple LED display, you can now read your settings on a 1.1″ LCD screen. The brushed, core-less motor runs exceptionally quietly and smoothly. Two drop-in batteries—one short and one long—noticeably extend your session time, and you can adjust the voltage in fine 0.2-V increments instead of rough jumps. Plus, it’s compatible with ErgoShield grips. 3 mm or 4 mm stroke—which one is right for you? The One Update is available in two versions with fixed stroke lengths. The shorter 3-mm stroke feels gentler on the skin and really shines when it comes to shading, color gradients, and black-and-gray work. The longer 4-mm stroke provides more impact and is suitable for bold outlines and heavy packing. Those who primarily tattoo in one direction should choose accordingly; many artists purchase both stroke lengths for different types of work. What this means in practice The wide operating range—80 to 180 Hz and 4,800 to 10,800 RPM at 5 to 12 V—covers lines, shading, and filling in areas. The 0.2-V increments give you finer control over the stroke, especially when transitioning from lining to whip shading. The coreless motor ensures smooth, low-vibration operation, which is easy on your hand even after hours of use. And because you’re working with two batteries, you can simply swap them out when one runs low and keep tattooing instead of waiting for it to charge. FK-One users consistently praise the series’ ease of use and versatility. The Update version is new on the market and continues this line with the upgrades mentioned—reliable real-world experience specifically with the Update is just beginning to accumulate. Technical Specifications (apply to all finishes and both stroke lengths) Finishes: Stealth, Gunmetal, Pop Pink Travel: 3 mm or 4 mm (fixed, as a variant) Material: 6061-T6 aluminum Display: 1.1″ LCD Batteries: 2 dual drop-in cells (18500A & 18650GA) Battery capacity: short battery 2,000 mAh, long battery 3,300 mAh Run time (short battery): up to 5.5 hours (depending on settings) Battery life (long battery): up to 6.5 hours (depending on settings) Maximum average runtime: up to 12 hours (depending on battery and settings) Voltage range: 5–12 V, in 0.2-V increments Frequency range: 80–180 Hz Motor: brushed coreless motor Speed range: 4,800–10,800 rpm Weight with long battery: 233 g Weight with short battery: 215 g Length with long battery: 136 mm Length with short battery: 127 mm Maximum width: 38 mm Compatible with FK ErgoShield Grip Made in the USA Package Contents 2 drop-in batteries (short & long) eFest Slim K2 charger USB-C cable Travel case Category The One Update is the wireless all-rounder for all techniques. If you want to adjust the stroke while the machine is running, the FK One Adjust with its wheel-adjustable stroke is the alternative. If you’re looking for a clearly readable, smooth-running wireless machine with long battery life and precise voltage control, you’ve come to the right place. FAQ What colors and stroke lengths are available? Three finishes—Stealth, Gunmetal, and Pop Pink—each with a fixed stroke length of 3 mm or 4 mm. You can select either option in the variant. 3 mm or 4 mm—which should I choose? A shorter 3-mm stroke for smoother shading, gradients, and black-and-gray work; a longer 4-mm stroke for rich outlines and bold filling. What sets the updated version apart from the original FK One? New features include the 1.1″ LCD, two drop-in batteries with longer runtime, voltage control in 0.2-V increments, the brushed coreless motor, and ErgoShield compatibility. How long does the battery last? The short batterylasts up to 5.5 hours, the long one up to 6.5 hours; combined, up to about 12 hours—depending on the settings. Can I adjust the stroke while the device is running? No. The One Update has a fixed stroke length (3 or 4 mm). The FK One Adjust offers an adjustable stroke. Which grips are compatible, and where is it manufactured? Compatible with FK ErgoShield grips; housing made of 6061-T6 aluminum, manufactured in the USA.

FK Irons One Update - Wireless Tattoo Machine, 3 Finishes, 3 & 4 mm Stroke (Made in the USA) Cordless, coreless, easy to read. The FK Irons One Update is the redesigned FK ONE—featuring a 1.1″ digital LCD, a brushed coreless motor, and two drop-in batteries that together provide up to 12 hours of tattooing time. Housing made of 6061-T6 aluminum, manufactured in the USA, with voltage adjustable in fine 0.2-V increments. You choose your finish— Stealth, Gunmetal, or Pop Pink —and the stroke length: 3 mm or 4 mm. Built for long sessions that won’t slow you down. At a Glance Brand / Model: FK Irons One Update (cordless pen machine) Finishes: Stealth, Gunmetal, Pop Pink (selectable as a variant) Stroke: 3 mm or 4 mm, fixed stroke length (selectable as a variant) Motor: brushed coreless motor—ultra-smooth operation Display: 1.1″ LCD clearly shows the settings Battery: two drop-in cells—short (18500A) and long (18650GA) Run time: short battery up to 5.5 hours, long battery up to 6.5 hours, combined up to ~12 hours Voltage: 5–12 V, adjustable in 0.2-V increments Frequency: 80–180 Hz, speed 4,800–10,800 rpm Grips: compatible with FK ErgoShield grips Material: 6061-T6 aluminum, Made in the USA What’s new compared to the FK One This updated version focuses precisely on the features that matter most in everyday use. Instead of a simple LED display, you can now read your settings on a 1.1″ LCD screen. The brushed, core-less motor runs exceptionally quietly and smoothly. Two drop-in batteries—one short and one long—noticeably extend your session time, and you can adjust the voltage in fine 0.2-V increments instead of rough jumps. Plus, it’s compatible with ErgoShield grips. 3 mm or 4 mm stroke—which one is right for you? The One Update is available in two versions with fixed stroke lengths. The shorter 3-mm stroke feels gentler on the skin and really shines when it comes to shading, color gradients, and black-and-gray work. The longer 4-mm stroke provides more impact and is suitable for bold outlines and heavy packing. Those who primarily tattoo in one direction should choose accordingly; many artists purchase both stroke lengths for different types of work. What this means in practice The wide operating range—80 to 180 Hz and 4,800 to 10,800 RPM at 5 to 12 V—covers lines, shading, and filling in areas. The 0.2-V increments give you finer control over the stroke, especially when transitioning from lining to whip shading. The coreless motor ensures smooth, low-vibration operation, which is easy on your hand even after hours of use. And because you’re working with two batteries, you can simply swap them out when one runs low and keep tattooing instead of waiting for it to charge. FK-One users consistently praise the series’ ease of use and versatility. The Update version is new on the market and continues this line with the upgrades mentioned—reliable real-world experience specifically with the Update is just beginning to accumulate. Technical Specifications (apply to all finishes and both stroke lengths) Finishes: Stealth, Gunmetal, Pop Pink Travel: 3 mm or 4 mm (fixed, as a variant) Material: 6061-T6 aluminum Display: 1.1″ LCD Batteries: 2 dual drop-in cells (18500A & 18650GA) Battery capacity: short battery 2,000 mAh, long battery 3,300 mAh Run time (short battery): up to 5.5 hours (depending on settings) Battery life (long battery): up to 6.5 hours (depending on settings) Maximum average runtime: up to 12 hours (depending on battery and settings) Voltage range: 5–12 V, in 0.2-V increments Frequency range: 80–180 Hz Motor: brushed coreless motor Speed range: 4,800–10,800 rpm Weight with long battery: 233 g Weight with short battery: 215 g Length with long battery: 136 mm Length with short battery: 127 mm Maximum width: 38 mm Compatible with FK ErgoShield Grip Made in the USA Package Contents 2 drop-in batteries (short & long) eFest Slim K2 charger USB-C cable Travel case Category The One Update is the wireless all-rounder for all techniques. If you want to adjust the stroke while the machine is running, the FK One Adjust with its wheel-adjustable stroke is the alternative. If you’re looking for a clearly readable, smooth-running wireless machine with long battery life and precise voltage control, you’ve come to the right place. FAQ What colors and stroke lengths are available? Three finishes—Stealth, Gunmetal, and Pop Pink—each with a fixed stroke length of 3 mm or 4 mm. You can select either option in the variant. 3 mm or 4 mm—which should I choose? A shorter 3-mm stroke for smoother shading, gradients, and black-and-gray work; a longer 4-mm stroke for rich outlines and bold filling. What sets the updated version apart from the original FK One? New features include the 1.1″ LCD, two drop-in batteries with longer runtime, voltage control in 0.2-V increments, the brushed coreless motor, and ErgoShield compatibility. How long does the battery last? The short batterylasts up to 5.5 hours, the long one up to 6.5 hours; combined, up to about 12 hours—depending on the settings. Can I adjust the stroke while the device is running? No. The One Update has a fixed stroke length (3 or 4 mm). The FK One Adjust offers an adjustable stroke. Which grips are compatible, and where is it manufactured? Compatible with FK ErgoShield grips; housing made of 6061-T6 aluminum, manufactured in the USA.

FK Irons One Update - Wireless Tattoo Machine, 3 Finishes, 3 & 4 mm Stroke (Made in the USA) Cordless, coreless, easy to read. The FK Irons One Update is the redesigned FK ONE—featuring a 1.1″ digital LCD, a brushed coreless motor, and two drop-in batteries that together provide up to 12 hours of tattooing time. Housing made of 6061-T6 aluminum, manufactured in the USA, with voltage adjustable in fine 0.2-V increments. You choose your finish— Stealth, Gunmetal, or Pop Pink —and the stroke length: 3 mm or 4 mm. Built for long sessions that won’t slow you down. At a Glance Brand / Model: FK Irons One Update (cordless pen machine) Finishes: Stealth, Gunmetal, Pop Pink (selectable as a variant) Stroke: 3 mm or 4 mm, fixed stroke length (selectable as a variant) Motor: brushed coreless motor—ultra-smooth operation Display: 1.1″ LCD clearly shows the settings Battery: two drop-in cells—short (18500A) and long (18650GA) Run time: short battery up to 5.5 hours, long battery up to 6.5 hours, combined up to ~12 hours Voltage: 5–12 V, adjustable in 0.2-V increments Frequency: 80–180 Hz, speed 4,800–10,800 rpm Grips: compatible with FK ErgoShield grips Material: 6061-T6 aluminum, Made in the USA What’s new compared to the FK One This updated version focuses precisely on the features that matter most in everyday use. Instead of a simple LED display, you can now read your settings on a 1.1″ LCD screen. The brushed, core-less motor runs exceptionally quietly and smoothly. Two drop-in batteries—one short and one long—noticeably extend your session time, and you can adjust the voltage in fine 0.2-V increments instead of rough jumps. Plus, it’s compatible with ErgoShield grips. 3 mm or 4 mm stroke—which one is right for you? The One Update is available in two versions with fixed stroke lengths. The shorter 3-mm stroke feels gentler on the skin and really shines when it comes to shading, color gradients, and black-and-gray work. The longer 4-mm stroke provides more impact and is suitable for bold outlines and heavy packing. Those who primarily tattoo in one direction should choose accordingly; many artists purchase both stroke lengths for different types of work. What this means in practice The wide operating range—80 to 180 Hz and 4,800 to 10,800 RPM at 5 to 12 V—covers lines, shading, and filling in areas. The 0.2-V increments give you finer control over the stroke, especially when transitioning from lining to whip shading. The coreless motor ensures smooth, low-vibration operation, which is easy on your hand even after hours of use. And because you’re working with two batteries, you can simply swap them out when one runs low and keep tattooing instead of waiting for it to charge. FK-One users consistently praise the series’ ease of use and versatility. The Update version is new on the market and continues this line with the upgrades mentioned—reliable real-world experience specifically with the Update is just beginning to accumulate. Technical Specifications (apply to all finishes and both stroke lengths) Finishes: Stealth, Gunmetal, Pop Pink Travel: 3 mm or 4 mm (fixed, as a variant) Material: 6061-T6 aluminum Display: 1.1″ LCD Batteries: 2 dual drop-in cells (18500A & 18650GA) Battery capacity: short battery 2,000 mAh, long battery 3,300 mAh Run time (short battery): up to 5.5 hours (depending on settings) Battery life (long battery): up to 6.5 hours (depending on settings) Maximum average runtime: up to 12 hours (depending on battery and settings) Voltage range: 5–12 V, in 0.2-V increments Frequency range: 80–180 Hz Motor: brushed coreless motor Speed range: 4,800–10,800 rpm Weight with long battery: 233 g Weight with short battery: 215 g Length with long battery: 136 mm Length with short battery: 127 mm Maximum width: 38 mm Compatible with FK ErgoShield Grip Made in the USA Package Contents 2 drop-in batteries (short & long) eFest Slim K2 charger USB-C cable Travel case Category The One Update is the wireless all-rounder for all techniques. If you want to adjust the stroke while the machine is running, the FK One Adjust with its wheel-adjustable stroke is the alternative. If you’re looking for a clearly readable, smooth-running wireless machine with long battery life and precise voltage control, you’ve come to the right place. FAQ What colors and stroke lengths are available? Three finishes—Stealth, Gunmetal, and Pop Pink—each with a fixed stroke length of 3 mm or 4 mm. You can select either option in the variant. 3 mm or 4 mm—which should I choose? A shorter 3-mm stroke for smoother shading, gradients, and black-and-gray work; a longer 4-mm stroke for rich outlines and bold filling. What sets the updated version apart from the original FK One? New features include the 1.1″ LCD, two drop-in batteries with longer runtime, voltage control in 0.2-V increments, the brushed coreless motor, and ErgoShield compatibility. How long does the battery last? The short batterylasts up to 5.5 hours, the long one up to 6.5 hours; combined, up to about 12 hours—depending on the settings. Can I adjust the stroke while the device is running? No. The One Update has a fixed stroke length (3 or 4 mm). The FK One Adjust offers an adjustable stroke. Which grips are compatible, and where is it manufactured? Compatible with FK ErgoShield grips; housing made of 6061-T6 aluminum, manufactured in the USA.

FK Irons One Update - Wireless Tattoo Machine, 3 Finishes, 3 & 4 mm Stroke (Made in the USA) Cordless, coreless, easy to read. The FK Irons One Update is the redesigned FK ONE—featuring a 1.1″ digital LCD, a brushed coreless motor, and two drop-in batteries that together provide up to 12 hours of tattooing time. Housing made of 6061-T6 aluminum, manufactured in the USA, with voltage adjustable in fine 0.2-V increments. You choose your finish— Stealth, Gunmetal, or Pop Pink —and the stroke length: 3 mm or 4 mm. Built for long sessions that won’t slow you down. At a Glance Brand / Model: FK Irons One Update (cordless pen machine) Finishes: Stealth, Gunmetal, Pop Pink (selectable as a variant) Stroke: 3 mm or 4 mm, fixed stroke length (selectable as a variant) Motor: brushed coreless motor—ultra-smooth operation Display: 1.1″ LCD clearly shows the settings Battery: two drop-in cells—short (18500A) and long (18650GA) Run time: short battery up to 5.5 hours, long battery up to 6.5 hours, combined up to ~12 hours Voltage: 5–12 V, adjustable in 0.2-V increments Frequency: 80–180 Hz, speed 4,800–10,800 rpm Grips: compatible with FK ErgoShield grips Material: 6061-T6 aluminum, Made in the USA What’s new compared to the FK One This updated version focuses precisely on the features that matter most in everyday use. Instead of a simple LED display, you can now read your settings on a 1.1″ LCD screen. The brushed, core-less motor runs exceptionally quietly and smoothly. Two drop-in batteries—one short and one long—noticeably extend your session time, and you can adjust the voltage in fine 0.2-V increments instead of rough jumps. Plus, it’s compatible with ErgoShield grips. 3 mm or 4 mm stroke—which one is right for you? The One Update is available in two versions with fixed stroke lengths. The shorter 3-mm stroke feels gentler on the skin and really shines when it comes to shading, color gradients, and black-and-gray work. The longer 4-mm stroke provides more impact and is suitable for bold outlines and heavy packing. Those who primarily tattoo in one direction should choose accordingly; many artists purchase both stroke lengths for different types of work. What this means in practice The wide operating range—80 to 180 Hz and 4,800 to 10,800 RPM at 5 to 12 V—covers lines, shading, and filling in areas. The 0.2-V increments give you finer control over the stroke, especially when transitioning from lining to whip shading. The coreless motor ensures smooth, low-vibration operation, which is easy on your hand even after hours of use. And because you’re working with two batteries, you can simply swap them out when one runs low and keep tattooing instead of waiting for it to charge. FK-One users consistently praise the series’ ease of use and versatility. The Update version is new on the market and continues this line with the upgrades mentioned—reliable real-world experience specifically with the Update is just beginning to accumulate. Technical Specifications (apply to all finishes and both stroke lengths) Finishes: Stealth, Gunmetal, Pop Pink Travel: 3 mm or 4 mm (fixed, as a variant) Material: 6061-T6 aluminum Display: 1.1″ LCD Batteries: 2 dual drop-in cells (18500A & 18650GA) Battery capacity: short battery 2,000 mAh, long battery 3,300 mAh Run time (short battery): up to 5.5 hours (depending on settings) Battery life (long battery): up to 6.5 hours (depending on settings) Maximum average runtime: up to 12 hours (depending on battery and settings) Voltage range: 5–12 V, in 0.2-V increments Frequency range: 80–180 Hz Motor: brushed coreless motor Speed range: 4,800–10,800 rpm Weight with long battery: 233 g Weight with short battery: 215 g Length with long battery: 136 mm Length with short battery: 127 mm Maximum width: 38 mm Compatible with FK ErgoShield Grip Made in the USA Package Contents 2 drop-in batteries (short & long) eFest Slim K2 charger USB-C cable Travel case Category The One Update is the wireless all-rounder for all techniques. If you want to adjust the stroke while the machine is running, the FK One Adjust with its wheel-adjustable stroke is the alternative. If you’re looking for a clearly readable, smooth-running wireless machine with long battery life and precise voltage control, you’ve come to the right place. FAQ What colors and stroke lengths are available? Three finishes—Stealth, Gunmetal, and Pop Pink—each with a fixed stroke length of 3 mm or 4 mm. You can select either option in the variant. 3 mm or 4 mm—which should I choose? A shorter 3-mm stroke for smoother shading, gradients, and black-and-gray work; a longer 4-mm stroke for rich outlines and bold filling. What sets the updated version apart from the original FK One? New features include the 1.1″ LCD, two drop-in batteries with longer runtime, voltage control in 0.2-V increments, the brushed coreless motor, and ErgoShield compatibility. How long does the battery last? The short batterylasts up to 5.5 hours, the long one up to 6.5 hours; combined, up to about 12 hours—depending on the settings. Can I adjust the stroke while the device is running? No. The One Update has a fixed stroke length (3 or 4 mm). The FK One Adjust offers an adjustable stroke. Which grips are compatible, and where is it manufactured? Compatible with FK ErgoShield grips; housing made of 6061-T6 aluminum, manufactured in the USA.

TattooMed BlackBag - Foldable Fabric Bag Made from Recycled Materials 40 × 40 × 8 cm The TattooMed BlackBag is a foldable black fabric bag made from recycled materials with a zipper. Measuring 40 × 40 × 8 cm and featuring a 25 cm-long handle, it holds toiletries and everyday items. When folded, it fits in your pants pocket and is ready to go for your next shopping trip. At a Glance Product: TattooMed BlackBag (fabric bag) Color: Black Material: Recycled material Dimensions: 40 × 40 × 8 cm Handle: 25 cm Closure: Zipper Features: foldable, lightweight Uses As an everyday and shopping bag: the zipper keeps the contents secure, and it has enough room for groceries as well as toiletries, a towel, and small items—whether you’re shopping, at the beach, or at the outdoor pool. Because it folds down small, you can always have it with you without it taking up much space. For gyms For studios, it’s ideal as a giveaway or merchandise: New clients can take their aftercare products home right away in a bag featuring the studio’s or brand’s logo—a practical promotional item that continues to be used after the purchase. FAQ How big is the bag? 40 × 40 × 8 cm, with a 25 cm-long handle. Does the bag have a closure? Yes, a zipper. What material is it made of? It’s made of recycled material. The manufacturer does not specify the exact fiber composition. Is it foldable? Yes. It folds up small and can be stowed in a pants pocket.

! SUPER SALE ! - 50% Expiration date: May 31, 2026! ! ! Ruby Port Dynamic Platinum 30 ml Product is unopened, not a B-grade item! Clearance items are excluded from exchange or return.

TattooMed Studio Pro Tape - Fixation Tape 3.8 cm × 9.1 m, 5 rolls (Yellow, Pink, or Black) TattooMed Studio Pro Tape is an elastic cotton-fabric fixation tape with a hypoallergenic acrylic adhesive layer— designed to securely hold a wound dressing or the TattooMed Absorbent Pad in place on the skin after tattooing. Thanks to the serrated perforation along the long side, it can be torn to the desired length by hand without any additional tools—so you can adjust the length with one hand without having to search for scissors inside your glove. The package includes 5 individually wrapped rolls, each measuring 3.8 cm × 9.1 m, available in yellow, pink, or black. At a Glance Brand / Model: TattooMed Studio Pro Tape Material: Cotton fabric with a hypoallergenic acrylic adhesive layer Size: 3.8 cm × 9.1 m per roll Contents: 5 packaged rolls Colors: Yellow, Pink, or Black Features: elastic, breathable, and water-repellent; latex-free; high tear resistance; vegan Handling: serrated perforation along the long side (can be torn by hand), self-adhesive—no bandage clips required Compliance: Complies with the European Medical Device Regulation (MDR, EU 2017/745) Manufacturer: TattooMed In Use The elastic cotton fabric moves with the body, so the tape stays in place even over joints and around curves, where rigid paper tape would tear or come loose. Breathable and water-repellent—in practice, this means the dressing remains protected during showers in the first few days without completely sealing off the skin underneath. In addition to securing wound dressings, the tape can also be used to wrap around the handle— for better grip and a hygienic barrier during the session. Adhesive and Skin Compatibility The adhesive layer is a hypoallergenic acrylic adhesive, and the tape itself is latex-free —making it better suited for people with latex allergies and sensitive skin than traditional latex bandages. The product is vegan. Colors in Practice Yellow, pink, and black aren’t just for looks: If you’re managing multiple workstations or clients at the same time, you can use the color to keep track of them. Black remains discreet, while yellow and pink are easier to spot on darker surfaces and in the daily hustle of the studio. Size and Design At 3.8 cm wide, this roll is narrower than the 7.5-cm version and can be guided more precisely around small areas, fingers, or joints. The 9.1 m length per roll is sufficient for many bandages. Important: This tape has a true adhesive layer. It is not the cohesive “self-adhesive” TattooMed tape, which adheres only to itself and works without adhesive. FAQ Does the tape stay in place over joints and during movement? Yes. The elastic cotton fabric stretches with the body and is therefore less likely to come loose than rigid tape. Do I need scissors? No. You can tear off the desired length by hand along the perforated line on the long side. Is it suitable for people with latex allergies? The tape is latex-free and uses a hypoallergenic acrylic adhesive. If you have a known sensitivity to adhesives or acrylates, test it on an inconspicuous area first. Can I wrap it around the handle? Yes, it’s designed for that as well as for securing pads—it improves grip and hygiene on the grip. Is this the self-adhesive tape without adhesive? No. This version has an acrylic adhesive layer. The cohesive, self-adhesive version is a separate product. What are the compliance requirements? The tape complies with the European Medical Device Regulation (MDR).

TattooMed Studio Pro Tape - Fixation Tape 3.8 cm × 9.1 m, 5 rolls (Yellow, Pink, or Black) TattooMed Studio Pro Tape is an elastic cotton-fabric fixation tape with a hypoallergenic acrylic adhesive layer— designed to securely hold a wound dressing or the TattooMed Absorbent Pad in place on the skin after tattooing. Thanks to the serrated perforation along the long side, it can be torn to the desired length by hand without any additional tools—so you can adjust the length with one hand without having to search for scissors inside your glove. The package includes 5 individually wrapped rolls, each measuring 3.8 cm × 9.1 m, available in yellow, pink, or black. At a Glance Brand / Model: TattooMed Studio Pro Tape Material: Cotton fabric with a hypoallergenic acrylic adhesive layer Size: 3.8 cm × 9.1 m per roll Contents: 5 packaged rolls Colors: Yellow, Pink, or Black Features: elastic, breathable, and water-repellent; latex-free; high tear resistance; vegan Handling: serrated perforation along the long side (can be torn by hand), self-adhesive—no bandage clips required Compliance: Complies with the European Medical Device Regulation (MDR, EU 2017/745) Manufacturer: TattooMed In Use The elastic cotton fabric moves with the body, so the tape stays in place even over joints and around curves, where rigid paper tape would tear or come loose. Breathable and water-repellent—in practice, this means the dressing remains protected during showers in the first few days without completely sealing off the skin underneath. In addition to securing wound dressings, the tape can also be used to wrap around the handle— for better grip and a hygienic barrier during the session. Adhesive and Skin Compatibility The adhesive layer is a hypoallergenic acrylic adhesive, and the tape itself is latex-free —making it better suited for people with latex allergies and sensitive skin than traditional latex bandages. The product is vegan. Colors in Practice Yellow, pink, and black aren’t just for looks: If you’re managing multiple workstations or clients at the same time, you can use the color to keep track of them. Black remains discreet, while yellow and pink are easier to spot on darker surfaces and in the daily hustle of the studio. Size and Design At 3.8 cm wide, this roll is narrower than the 7.5-cm version and can be guided more precisely around small areas, fingers, or joints. The 9.1 m length per roll is sufficient for many bandages. Important: This tape has a true adhesive layer. It is not the cohesive “self-adhesive” TattooMed tape, which adheres only to itself and works without adhesive. FAQ Does the tape stay in place over joints and during movement? Yes. The elastic cotton fabric stretches with the body and is therefore less likely to come loose than rigid tape. Do I need scissors? No. You can tear off the desired length by hand along the perforated line on the long side. Is it suitable for people with latex allergies? The tape is latex-free and uses a hypoallergenic acrylic adhesive. If you have a known sensitivity to adhesives or acrylates, test it on an inconspicuous area first. Can I wrap it around the handle? Yes, it’s designed for that as well as for securing pads—it improves grip and hygiene on the grip. Is this the self-adhesive tape without adhesive? No. This version has an acrylic adhesive layer. The cohesive, self-adhesive version is a separate product. What are the compliance requirements? The tape complies with the European Medical Device Regulation (MDR).

TattooMed Studio Pro Tape - Fixation Tape 3.8 cm × 9.1 m, 5 rolls (Yellow, Pink, or Black) TattooMed Studio Pro Tape is an elastic cotton-fabric fixation tape with a hypoallergenic acrylic adhesive layer— designed to securely hold a wound dressing or the TattooMed Absorbent Pad in place on the skin after tattooing. Thanks to the serrated perforation along the long side, it can be torn to the desired length by hand without any additional tools—so you can adjust the length with one hand without having to search for scissors inside your glove. The package includes 5 individually wrapped rolls, each measuring 3.8 cm × 9.1 m, available in yellow, pink, or black. At a Glance Brand / Model: TattooMed Studio Pro Tape Material: Cotton fabric with a hypoallergenic acrylic adhesive layer Size: 3.8 cm × 9.1 m per roll Contents: 5 packaged rolls Colors: Yellow, Pink, or Black Features: elastic, breathable, and water-repellent; latex-free; high tear resistance; vegan Handling: serrated perforation along the long side (can be torn by hand), self-adhesive—no bandage clips required Compliance: Complies with the European Medical Device Regulation (MDR, EU 2017/745) Manufacturer: TattooMed In Use The elastic cotton fabric moves with the body, so the tape stays in place even over joints and around curves, where rigid paper tape would tear or come loose. Breathable and water-repellent—in practice, this means the dressing remains protected during showers in the first few days without completely sealing off the skin underneath. In addition to securing wound dressings, the tape can also be used to wrap around the handle— for better grip and a hygienic barrier during the session. Adhesive and Skin Compatibility The adhesive layer is a hypoallergenic acrylic adhesive, and the tape itself is latex-free —making it better suited for people with latex allergies and sensitive skin than traditional latex bandages. The product is vegan. Colors in Practice Yellow, pink, and black aren’t just for looks: If you’re managing multiple workstations or clients at the same time, you can use the color to keep track of them. Black remains discreet, while yellow and pink are easier to spot on darker surfaces and in the daily hustle of the studio. Size and Design At 3.8 cm wide, this roll is narrower than the 7.5-cm version and can be guided more precisely around small areas, fingers, or joints. The 9.1 m length per roll is sufficient for many bandages. Important: This tape has a true adhesive layer. It is not the cohesive “self-adhesive” TattooMed tape, which adheres only to itself and works without adhesive. FAQ Does the tape stay in place over joints and during movement? Yes. The elastic cotton fabric stretches with the body and is therefore less likely to come loose than rigid tape. Do I need scissors? No. You can tear off the desired length by hand along the perforated line on the long side. Is it suitable for people with latex allergies? The tape is latex-free and uses a hypoallergenic acrylic adhesive. If you have a known sensitivity to adhesives or acrylates, test it on an inconspicuous area first. Can I wrap it around the handle? Yes, it’s designed for that as well as for securing pads—it improves grip and hygiene on the grip. Is this the self-adhesive tape without adhesive? No. This version has an acrylic adhesive layer. The cohesive, self-adhesive version is a separate product. What are the compliance requirements? The tape complies with the European Medical Device Regulation (MDR).

TattooMed Studio Pro Tape - Fixation Tape 3.8 cm × 9.1 m, 5 rolls (Yellow, Pink, or Black) TattooMed Studio Pro Tape is an elastic cotton-fabric fixation tape with a hypoallergenic acrylic adhesive layer— designed to securely hold a wound dressing or the TattooMed Absorbent Pad in place on the skin after tattooing. Thanks to the serrated perforation along the long side, it can be torn to the desired length by hand without any additional tools—so you can adjust the length with one hand without having to search for scissors inside your glove. The package includes 5 individually wrapped rolls, each measuring 3.8 cm × 9.1 m, available in yellow, pink, or black. At a Glance Brand / Model: TattooMed Studio Pro Tape Material: Cotton fabric with a hypoallergenic acrylic adhesive layer Size: 3.8 cm × 9.1 m per roll Contents: 5 packaged rolls Colors: Yellow, Pink, or Black Features: elastic, breathable, and water-repellent; latex-free; high tear resistance; vegan Handling: serrated perforation along the long side (can be torn by hand), self-adhesive—no bandage clips required Compliance: Complies with the European Medical Device Regulation (MDR, EU 2017/745) Manufacturer: TattooMed In Use The elastic cotton fabric moves with the body, so the tape stays in place even over joints and around curves, where rigid paper tape would tear or come loose. Breathable and water-repellent—in practice, this means the dressing remains protected during showers in the first few days without completely sealing off the skin underneath. In addition to securing wound dressings, the tape can also be used to wrap around the handle— for better grip and a hygienic barrier during the session. Adhesive and Skin Compatibility The adhesive layer is a hypoallergenic acrylic adhesive, and the tape itself is latex-free —making it better suited for people with latex allergies and sensitive skin than traditional latex bandages. The product is vegan. Colors in Practice Yellow, pink, and black aren’t just for looks: If you’re managing multiple workstations or clients at the same time, you can use the color to keep track of them. Black remains discreet, while yellow and pink are easier to spot on darker surfaces and in the daily hustle of the studio. Size and Design At 3.8 cm wide, this roll is narrower than the 7.5-cm version and can be guided more precisely around small areas, fingers, or joints. The 9.1 m length per roll is sufficient for many bandages. Important: This tape has a true adhesive layer. It is not the cohesive “self-adhesive” TattooMed tape, which adheres only to itself and works without adhesive. FAQ Does the tape stay in place over joints and during movement? Yes. The elastic cotton fabric stretches with the body and is therefore less likely to come loose than rigid tape. Do I need scissors? No. You can tear off the desired length by hand along the perforated line on the long side. Is it suitable for people with latex allergies? The tape is latex-free and uses a hypoallergenic acrylic adhesive. If you have a known sensitivity to adhesives or acrylates, test it on an inconspicuous area first. Can I wrap it around the handle? Yes, it’s designed for that as well as for securing pads—it improves grip and hygiene on the grip. Is this the self-adhesive tape without adhesive? No. This version has an acrylic adhesive layer. The cohesive, self-adhesive version is a separate product. What are the compliance requirements? The tape complies with the European Medical Device Regulation (MDR).

Spirit Classic Thermal Extra Long Stencil Paper, Purple - 21.6 × 40.64 cm, 20 sheets Spirit Stencil Paper from the Classic Thermal series is the standard in many studios for clean stencil transfers. The Extra Long version, measuring 21.6 × 40.64 cm (8.5″ × 16″), offers a sheet length that allows even large-scale designs to be transferred in a single piece—without having to join multiple sheets together. 20 sheets, high-visibility purple. Manufactured by ReproFX in the USA. At a Glance Brand / Model: ReproFX Spirit Classic Thermal, Extra Long variant Color: Purple (high-visibility carbon dye) Size: 21.6 × 40.64 cm (8.5″ × 16″) Quantity: 20 sheets Compatibility: all thermal copiers / thermal printers; can also be used freehand Features: skin-safe, stable in storage, listed as vegan (Classic Series) Manufacturing: Made in the USA (ReproFX) Structure and Function Spirit Classic is a multi-layer thermal transfer paper. The top white layer carries the design; beneath it is a loose, milky-white intermediate layer, which is usually discarded; then comes the purple carbon layer, which transfers the color to the top sheet during printing; and finally, the yellow backing layer, which holds the template in place in the thermal copier. The highly visible purple dye pays off in practice: The line stands out clearly against the skin, even with delicate fine-line or lettering designs. Why “Extra Long”? With a sheet length of 40.64 cm, you can cover designs that won’t fit in one piece on standard (27.9 cm) or long (35.6 cm) sheets—such as sleeve, back, and thigh designs, or long ripped-line designs. A single, continuous stencil means no seams, no aligning of sections, and less distortion during transfer. In Use The paper works with all standard thermal copiers and can also be used for hand-drawn (freehand) stencils. For a rich, smudge-proof result on the skin, use it in combination with a transfer gel or cream. Store sheets flat, dry, and protected from light—the paper is stable in storage, but creased sheets may feed unevenly through the copier. Compliance Practical context: EU Regulation 2020/2081 (REACH, Annex XVII, Entry 75) governs tattoo and PMU inks, not thermal stencil paper. For transfer paper, the relevant property is skin compatibility—Spirit Classic is listed as skin-safe and vegan. I do not have a product-specific batch or test number (see “Open Issues”). FAQ Does the paper fit in any thermal printer? Yes. Spirit Classic is compatible with all thermal and digital stencil printers. Just make sure your device can handle a sheet length of 40.64 cm. Can I also use it without a thermal copier? Yes, it’s also suitable for stencils drawn freehand. How does Extra Long differ from Long and Standard? Only in sheet length: Standard is 27.9 cm, Long is 35.6 cm, and Extra Long is 40.64 cm. The width and construction are identical. Is the paper vegan and skin-friendly? The Classic series is listed as vegan and skin-safe. How should I store it? Flat, dry, and protected from light. If kept free of creases, it will feed smoothly through the copier.

Magic Moon Sterile Color Caps – EO-gas sterilized, available in four varieties Magic Moon’s sterile paint caps come individually sealed: perforated, separable plastic blisters, each sterilized with EO gas and sealed with medical-grade sealing paper. For each setup, you simply detach only the blisters you need—the rest remain sealed and sterile. Four variants are available, differing in diameter and contents; you can select the appropriate one using the variant selection. At a Glance Brand / Model: Magic Moon Sterile Ink Caps Sterilization: EO gas Packaging: Perforated, individually detachable blisters, sealed with medical sealing paper Material: Plastic Application: Disposable / for single use Diameter / Quantity: 1, 3, or 4 caps per blister, depending on the variant (details below) The four variants (all EO-gas sterilized, disposable) ø 13 mm – 120 blisters, each containing 4 caps (480 caps). Standard size for everyday use: moderate ink volume, suitable for most line work and shading. ø 17 mm – 120 blisters, 3 caps each (360 caps). More pigment per cap—for filling in larger areas and larger magnums that require more frequent dipping. ø 13 mm + ø 20 mm combo – 120 blister packs, each containing 3 caps (each blister pack contains 2× ø 13 mm + 1× ø 20 mm; 360 caps total). The perfect mix when you need small caps for details and shading, plus a large one for filling in areas. ø 33 mm – 60 caps. Large design for holding large amounts of paint, for thinning and mixing, or as a water cup at your workstation. Why sterile caps? The difference from loose bulk paint caps isn’t the cap itself, but the seal. Each blister pack remains sterile until opened; it is EO-gas sterilized and sealed with medical-grade sealing paper—similar to the peel-open principle used in disposable medical supplies. This reduces the risk of cross-contamination and can be clearly documented during a hygiene inspection. Sterility is maintained only as long as the blister pack remains intact—a torn or damaged blister pack is no longer sterile. In Use Separate the blister pack, peel it open, and remove the cap. A dab of Vaseline under the cap keeps it in place on the work surface instead of tipping over when the needle is inserted—this is especially important for smaller diameters. After the session, the caps are discarded; they are disposable and not reused. The flat blister format saves noticeable space in the case compared to traditional caps or stands, making the sterile color caps a practical companion for conventions and guest spots. Choosing the Right Size The diameter depends on the amount of ink and needle configuration: ø 13 mm as an all-rounder for liners and standard shading, ø 17 mm for filling larger areas, the 13/20 mm combo if you need both at the same time, and ø 33 mm for large quantities or as a water cup. If you work with multiple shades, combine them accordingly. Comparison of Options Compared to silicone ink caps (reusable, but must be sterilized by the user) and paper caps (biodegradable, but not sterile), the advantage here is the pre-sterilized packaging straight from the factory—no need for your own reprocessing or sterilization steps. FAQ Are the caps individually sterile-packed? Yes. Each perforated blister pack is separately sealed with medical-grade sealing paper and EO-gas sterilized. Sterility is maintained as long as the blister pack remains unopened and undamaged. How many caps are in each blister pack? That depends on the variant: 4 (ø 13 mm), 3 (ø 17 mm), 3 (combination 13/20 mm), or 1 (ø 33 mm, as a single cap). What size do I need? 13 mm diameter for liners and details, 17 mm diameter for packing, the 13/20 mm combo for mixed setups, and 33 mm diameter for large amounts of paint or water. Can I reuse the caps? No, they are disposable. Dispose of them after use. How do I keep the caps in place? A small dab of Vaseline under the cap will keep it in place on your work surface.

Magic Moon Sterile Color Caps – EO-gas sterilized, available in four varieties Magic Moon’s sterile paint caps come individually sealed: perforated, separable plastic blisters, each sterilized with EO gas and sealed with medical-grade sealing paper. For each setup, you simply detach only the blisters you need—the rest remain sealed and sterile. Four variants are available, differing in diameter and contents; you can select the appropriate one using the variant selection. At a Glance Brand / Model: Magic Moon Sterile Ink Caps Sterilization: EO gas Packaging: Perforated, individually detachable blisters, sealed with medical sealing paper Material: Plastic Application: Disposable / for single use Diameter / Quantity: 1, 3, or 4 caps per blister, depending on the variant (details below) The four variants (all EO-gas sterilized, disposable) ø 13 mm – 120 blisters, each containing 4 caps (480 caps). Standard size for everyday use: moderate ink volume, suitable for most line work and shading. ø 17 mm – 120 blisters, 3 caps each (360 caps). More pigment per cap—for filling in larger areas and larger magnums that require more frequent dipping. ø 13 mm + ø 20 mm combo – 120 blister packs, each containing 3 caps (each blister pack contains 2× ø 13 mm + 1× ø 20 mm; 360 caps total). The perfect mix when you need small caps for details and shading, plus a large one for filling in areas. ø 33 mm – 60 caps. Large design for holding large amounts of paint, for thinning and mixing, or as a water cup at your workstation. Why sterile caps? The difference from loose bulk paint caps isn’t the cap itself, but the seal. Each blister pack remains sterile until opened; it is EO-gas sterilized and sealed with medical-grade sealing paper—similar to the peel-open principle used in disposable medical supplies. This reduces the risk of cross-contamination and can be clearly documented during a hygiene inspection. Sterility is maintained only as long as the blister pack remains intact—a torn or damaged blister pack is no longer sterile. In Use Separate the blister pack, peel it open, and remove the cap. A dab of Vaseline under the cap keeps it in place on the work surface instead of tipping over when the needle is inserted—this is especially important for smaller diameters. After the session, the caps are discarded; they are disposable and not reused. The flat blister format saves noticeable space in the case compared to traditional caps or stands, making the sterile color caps a practical companion for conventions and guest spots. Choosing the Right Size The diameter depends on the amount of ink and needle configuration: ø 13 mm as an all-rounder for liners and standard shading, ø 17 mm for filling larger areas, the 13/20 mm combo if you need both at the same time, and ø 33 mm for large quantities or as a water cup. If you work with multiple shades, combine them accordingly. Comparison of Options Compared to silicone ink caps (reusable, but must be sterilized by the user) and paper caps (biodegradable, but not sterile), the advantage here is the pre-sterilized packaging straight from the factory—no need for your own reprocessing or sterilization steps. FAQ Are the caps individually sterile-packed? Yes. Each perforated blister pack is separately sealed with medical-grade sealing paper and EO-gas sterilized. Sterility is maintained as long as the blister pack remains unopened and undamaged. How many caps are in each blister pack? That depends on the variant: 4 (ø 13 mm), 3 (ø 17 mm), 3 (combination 13/20 mm), or 1 (ø 33 mm, as a single cap). What size do I need? 13 mm diameter for liners and details, 17 mm diameter for packing, the 13/20 mm combo for mixed setups, and 33 mm diameter for large amounts of paint or water. Can I reuse the caps? No, they are disposable. Dispose of them after use. How do I keep the caps in place? A small dab of Vaseline under the cap will keep it in place on your work surface.

Magic Moon Sterile Color Caps – EO-gas sterilized, available in four varieties Magic Moon’s sterile paint caps come individually sealed: perforated, separable plastic blisters, each sterilized with EO gas and sealed with medical-grade sealing paper. For each setup, you simply detach only the blisters you need—the rest remain sealed and sterile. Four variants are available, differing in diameter and contents; you can select the appropriate one using the variant selection. At a Glance Brand / Model: Magic Moon Sterile Ink Caps Sterilization: EO gas Packaging: Perforated, individually detachable blisters, sealed with medical sealing paper Material: Plastic Application: Disposable / for single use Diameter / Quantity: 1, 3, or 4 caps per blister, depending on the variant (details below) The four variants (all EO-gas sterilized, disposable) ø 13 mm – 120 blisters, each containing 4 caps (480 caps). Standard size for everyday use: moderate ink volume, suitable for most line work and shading. ø 17 mm – 120 blisters, 3 caps each (360 caps). More pigment per cap—for filling in larger areas and larger magnums that require more frequent dipping. ø 13 mm + ø 20 mm combo – 120 blister packs, each containing 3 caps (each blister pack contains 2× ø 13 mm + 1× ø 20 mm; 360 caps total). The perfect mix when you need small caps for details and shading, plus a large one for filling in areas. ø 33 mm – 60 caps. Large design for holding large amounts of paint, for thinning and mixing, or as a water cup at your workstation. Why sterile caps? The difference from loose bulk paint caps isn’t the cap itself, but the seal. Each blister pack remains sterile until opened; it is EO-gas sterilized and sealed with medical-grade sealing paper—similar to the peel-open principle used in disposable medical supplies. This reduces the risk of cross-contamination and can be clearly documented during a hygiene inspection. Sterility is maintained only as long as the blister pack remains intact—a torn or damaged blister pack is no longer sterile. In Use Separate the blister pack, peel it open, and remove the cap. A dab of Vaseline under the cap keeps it in place on the work surface instead of tipping over when the needle is inserted—this is especially important for smaller diameters. After the session, the caps are discarded; they are disposable and not reused. The flat blister format saves noticeable space in the case compared to traditional caps or stands, making the sterile color caps a practical companion for conventions and guest spots. Choosing the Right Size The diameter depends on the amount of ink and needle configuration: ø 13 mm as an all-rounder for liners and standard shading, ø 17 mm for filling larger areas, the 13/20 mm combo if you need both at the same time, and ø 33 mm for large quantities or as a water cup. If you work with multiple shades, combine them accordingly. Comparison of Options Compared to silicone ink caps (reusable, but must be sterilized by the user) and paper caps (biodegradable, but not sterile), the advantage here is the pre-sterilized packaging straight from the factory—no need for your own reprocessing or sterilization steps. FAQ Are the caps individually sterile-packed? Yes. Each perforated blister pack is separately sealed with medical-grade sealing paper and EO-gas sterilized. Sterility is maintained as long as the blister pack remains unopened and undamaged. How many caps are in each blister pack? That depends on the variant: 4 (ø 13 mm), 3 (ø 17 mm), 3 (combination 13/20 mm), or 1 (ø 33 mm, as a single cap). What size do I need? 13 mm diameter for liners and details, 17 mm diameter for packing, the 13/20 mm combo for mixed setups, and 33 mm diameter for large amounts of paint or water. Can I reuse the caps? No, they are disposable. Dispose of them after use. How do I keep the caps in place? A small dab of Vaseline under the cap will keep it in place on your work surface.

Magic Moon Sterile Color Caps – EO-gas sterilized, available in four varieties Magic Moon’s sterile paint caps come individually sealed: perforated, separable plastic blisters, each sterilized with EO gas and sealed with medical-grade sealing paper. For each setup, you simply detach only the blisters you need—the rest remain sealed and sterile. Four variants are available, differing in diameter and contents; you can select the appropriate one using the variant selection. At a Glance Brand / Model: Magic Moon Sterile Ink Caps Sterilization: EO gas Packaging: Perforated, individually detachable blisters, sealed with medical sealing paper Material: Plastic Application: Disposable / for single use Diameter / Quantity: 1, 3, or 4 caps per blister, depending on the variant (details below) The four variants (all EO-gas sterilized, disposable) ø 13 mm – 120 blisters, each containing 4 caps (480 caps). Standard size for everyday use: moderate ink volume, suitable for most line work and shading. ø 17 mm – 120 blisters, 3 caps each (360 caps). More pigment per cap—for filling in larger areas and larger magnums that require more frequent dipping. ø 13 mm + ø 20 mm combo – 120 blister packs, each containing 3 caps (each blister pack contains 2× ø 13 mm + 1× ø 20 mm; 360 caps total). The perfect mix when you need small caps for details and shading, plus a large one for filling in areas. ø 33 mm – 60 caps. Large design for holding large amounts of paint, for thinning and mixing, or as a water cup at your workstation. Why sterile caps? The difference from loose bulk paint caps isn’t the cap itself, but the seal. Each blister pack remains sterile until opened; it is EO-gas sterilized and sealed with medical-grade sealing paper—similar to the peel-open principle used in disposable medical supplies. This reduces the risk of cross-contamination and can be clearly documented during a hygiene inspection. Sterility is maintained only as long as the blister pack remains intact—a torn or damaged blister pack is no longer sterile. In Use Separate the blister pack, peel it open, and remove the cap. A dab of Vaseline under the cap keeps it in place on the work surface instead of tipping over when the needle is inserted—this is especially important for smaller diameters. After the session, the caps are discarded; they are disposable and not reused. The flat blister format saves noticeable space in the case compared to traditional caps or stands, making the sterile color caps a practical companion for conventions and guest spots. Choosing the Right Size The diameter depends on the amount of ink and needle configuration: ø 13 mm as an all-rounder for liners and standard shading, ø 17 mm for filling larger areas, the 13/20 mm combo if you need both at the same time, and ø 33 mm for large quantities or as a water cup. If you work with multiple shades, combine them accordingly. Comparison of Options Compared to silicone ink caps (reusable, but must be sterilized by the user) and paper caps (biodegradable, but not sterile), the advantage here is the pre-sterilized packaging straight from the factory—no need for your own reprocessing or sterilization steps. FAQ Are the caps individually sterile-packed? Yes. Each perforated blister pack is separately sealed with medical-grade sealing paper and EO-gas sterilized. Sterility is maintained as long as the blister pack remains unopened and undamaged. How many caps are in each blister pack? That depends on the variant: 4 (ø 13 mm), 3 (ø 17 mm), 3 (combination 13/20 mm), or 1 (ø 33 mm, as a single cap). What size do I need? 13 mm diameter for liners and details, 17 mm diameter for packing, the 13/20 mm combo for mixed setups, and 33 mm diameter for large amounts of paint or water. Can I reuse the caps? No, they are disposable. Dispose of them after use. How do I keep the caps in place? A small dab of Vaseline under the cap will keep it in place on your work surface.

Magic Moon Sterile Color Caps – EO-gas sterilized, available in four varieties Magic Moon’s sterile paint caps come individually sealed: perforated, separable plastic blisters, each sterilized with EO gas and sealed with medical-grade sealing paper. For each setup, you simply detach only the blisters you need—the rest remain sealed and sterile. Four variants are available, differing in diameter and contents; you can select the appropriate one using the variant selection. At a Glance Brand / Model: Magic Moon Sterile Ink Caps Sterilization: EO gas Packaging: Perforated, individually detachable blisters, sealed with medical sealing paper Material: Plastic Application: Disposable / for single use Diameter / Quantity: 1, 3, or 4 caps per blister, depending on the variant (details below) The four variants (all EO-gas sterilized, disposable) ø 13 mm – 120 blisters, each containing 4 caps (480 caps). Standard size for everyday use: moderate ink volume, suitable for most line work and shading. ø 17 mm – 120 blisters, 3 caps each (360 caps). More pigment per cap—for filling in larger areas and larger magnums that require more frequent dipping. ø 13 mm + ø 20 mm combo – 120 blister packs, each containing 3 caps (each blister pack contains 2× ø 13 mm + 1× ø 20 mm; 360 caps total). The perfect mix when you need small caps for details and shading, plus a large one for filling in areas. ø 33 mm – 60 caps. Large design for holding large amounts of paint, for thinning and mixing, or as a water cup at your workstation. Why sterile caps? The difference from loose bulk paint caps isn’t the cap itself, but the seal. Each blister pack remains sterile until opened; it is EO-gas sterilized and sealed with medical-grade sealing paper—similar to the peel-open principle used in disposable medical supplies. This reduces the risk of cross-contamination and can be clearly documented during a hygiene inspection. Sterility is maintained only as long as the blister pack remains intact—a torn or damaged blister pack is no longer sterile. In Use Separate the blister pack, peel it open, and remove the cap. A dab of Vaseline under the cap keeps it in place on the work surface instead of tipping over when the needle is inserted—this is especially important for smaller diameters. After the session, the caps are discarded; they are disposable and not reused. The flat blister format saves noticeable space in the case compared to traditional caps or stands, making the sterile color caps a practical companion for conventions and guest spots. Choosing the Right Size The diameter depends on the amount of ink and needle configuration: ø 13 mm as an all-rounder for liners and standard shading, ø 17 mm for filling larger areas, the 13/20 mm combo if you need both at the same time, and ø 33 mm for large quantities or as a water cup. If you work with multiple shades, combine them accordingly. Comparison of Options Compared to silicone ink caps (reusable, but must be sterilized by the user) and paper caps (biodegradable, but not sterile), the advantage here is the pre-sterilized packaging straight from the factory—no need for your own reprocessing or sterilization steps. FAQ Are the caps individually sterile-packed? Yes. Each perforated blister pack is separately sealed with medical-grade sealing paper and EO-gas sterilized. Sterility is maintained as long as the blister pack remains unopened and undamaged. How many caps are in each blister pack? That depends on the variant: 4 (ø 13 mm), 3 (ø 17 mm), 3 (combination 13/20 mm), or 1 (ø 33 mm, as a single cap). What size do I need? 13 mm diameter for liners and details, 17 mm diameter for packing, the 13/20 mm combo for mixed setups, and 33 mm diameter for large amounts of paint or water. Can I reuse the caps? No, they are disposable. Dispose of them after use. How do I keep the caps in place? A small dab of Vaseline under the cap will keep it in place on your work surface.

Magic Moon White Vaseline - 60 x 5 g Single-Use Packets (Single Pack) Magic Moon White Vaseline is a tattoo vaseline available in hygienic 5-g single-use packets —one packet per customer, rather than being scooped from an open jar. Free of preservatives and fragrance, making it suitable for most skin types, including sensitive skin. The package contains 60 individual 5-g packets. At a Glance Brand / Model: Magic Moon White Vaseline, 60 × 5 g Single Pack Packaging: 60 individual 5-g packets (300 g total), for single use INCI: Paraffinum Liquidum, Microcrystalline Wax, Paraffin Preservative-free, fragrance-free Hygiene: Single-use packets reduce the risk of cross-contamination Usage: Lubricant for tattooing, for external use only Also available in a 1,000-g can (1 kg) Usage Vaseline is the standard lubricant for tattooing: A thin film reduces friction between the needle and the skin, keeps excess ink from clumping, and can be wiped away during the session without causing the lines to disappear—this ensures the tattoo design remains visible throughout the session. The 5-g packet is usually sufficient for one session with a client. Tear open, remove the contents, and discard after the session. Why individual packets instead of a jar? The main issue is hygiene. From an open jar, ink is taken multiple times throughout the day, often with the glove that was previously on the client—that’s the classic route for cross-contamination. In some EU countries, Vaseline tins are therefore already prohibited in tattoo studios. A sealed 5-g packet per client avoids this problem and can be clearly tracked during a hygiene inspection. Anyone who continues to use the jar should at least use only a disposable wooden spatula to scoop out the product. Composition and Skin The formula is intentionally simple: Paraffinum Liquidum, Microcrystalline Wax, and Paraffin—no fragrances, no preservatives, which are the most common irritants. This makes it suitable even for customers with sensitive skin. Vaseline is occlusive, meaning it forms a protective film on the skin and does not absorb into it. Limitations and Distinctions This Vaseline is a lubricant for use on clients, not an aftercare product. For wound care after piercing, use an aftercare cream designed for that purpose, not plain Vaseline. The product is paraffin/petroleum-based; those who prefer plant-based alternatives in their studio should take this into account when making a selection. For external use only; avoid contact with the eyes. FAQ What is Vaseline used for when tattooing? As a lubricating film during the tattooing process: It reduces needle friction, keeps excess ink from clumping, and helps the lines remain visible when wiping. Why individual packets and not the jar? For hygiene reasons. The single-use packet prevents multiple dips into an open jar and thus eliminates the risk of cross-contamination. Is Vaseline suitable for sensitive skin? Yes. It contains no fragrances or preservatives, which are common irritants. Is a 5-g packet enough? It’s usually enough for one session with a client. Is this a product for aftercare? No. It’s a lubricant for use during the tattooing process. An aftercare cream is intended for aftercare. What’s in it? Paraffinum Liquidum, Microcrystalline Wax, Paraffin—nothing else.

  ! SUPER-SALE !      - 20  %     Expiration date:     April  10,   2026  !!! Microblading Spill The Tea Perma Blend Luxe 10 ml Goods are unopened, no B-grade goods! Sale items cannot be exchanged or returned.   The manufacturers are based in the USA, but the "Luxe" range, which was developed specifically for the European market, is REACH-compliant and tested and certified by CTL Bielefeld ( Germany) and BVL-registered. Perma Blend Luxe stands for consistent and authentic results that remain unchanged = permanent! Handcrafted paint that enhances the work of every artist. Additional quality guarantee: - In vitro testing - Color calibration - Testing of over 4000 substances such as heavy metals, amines, and PAHs ... all without animal testing and vegan! At the Worldwide Eyebrow Festival in Rotterdam, the Innovation Award 2023 went to Perma Blend! Key features: Contents: 10 ml Microblading Vegan Cruelty-free Tested for heavy metals, amines, and PAHs CTL certified in Germany Made in the USA

Skin Doodler / Skin Surfer Skin Pens – Pack of 10 (Disposable, Freehand) Skin Doodler skin pens are disposable pens for freehand drawing directly on the skin—you can sketch out a design or adjust its placement and composition on the body before tattooing. Also known as Skin Surfer. The pack contains 10 pens; select your color from the options. At a Glance Brand / Model: Skin Doodler / Skin Surfer Skin Pens Contents: 10 disposable skin pens per pack Tip: 1-mm ball tip Dimensions: approx. 10.8 cm long, 1.6 mm thick (manufacturer’s specifications) Ink: Sterilized, consistent ink flow (manufacturer’s specifications) Usage: Freehand drawing directly on the skin; for single use Colors: Black, red, blue, purple, green (selectable options) Optional: Skin Doodler holder for a more comfortable grip Usage The 1-mm ball tip glides over the skin with minimal pressure without scratching—this allows you to draw clean lines instead of pressing them into the skin. Typical use: drawing a design freehand directly on the skin, adapting the lines to muscles and body contours, or tracing and adding to an applied stencil. Freehand drawing replaces or supplements stencil tracing—many artists use a stencil to draw the basic lines and then complete the rest freehand with the pen. Colors in Practice Using five colors isn’t an end in itself: You use color to clearly separate elements—such as structural lines, outlines, and shadow hints—and choose the contrast that best suits the skin tone. Black and blue are highly visible on most skin tones; red, green, and violet come in handy when black doesn’t provide enough contrast or when you want to distinguish between multiple layers. Hygiene and Compliance The pens are single-use: one pen per client, then discard. This reduces the risk of cross-contamination compared to sharing a marker. According to the manufacturer, the ink is sterilized and intended for use on the skin. It is a surface marker for outlining, not tattoo ink. Limitations and Comparison The drawn line sits on the skin and can smudge due to hand sweat or lubricants—so use sparingly when applying Vaseline. At 1.6 mm, the pen is very thin; for longer freehand mapping, the matching holder is worth using. The ball tip is ideal for fine, even lines; if you need wider strokes or soft shading, brush pens are the better choice. Both complement each other in the studio. FAQ Do I draw freehand with this, or is it a stencil? Freehand, directly on the skin. The pen replaces or supplements stencil tracing and is also suitable for tracing over an applied stencil. Are the pens suitable for every skin tone? Yes, depending on the color choice. On darker or tanned skin tones, a higher-contrast color provides better visibility than black. Disposable or reusable? Disposable. One pen per customer; dispose of it afterward. Do I need the Skin Doodler holder? Not necessarily. The pen is only 1.6 mm thick—but for longer periods of freehand work, the holder makes it more comfortable to use. Is the ink skin-safe and EU-compliant? The manufacturer specifies that the ink is sterilized and intended for use on the skin. No specific EU/REACH information or ingredient declaration is provided for this item (see product details or upon request). Does the drawn line smudge? It acts as a surface marker on the skin and may smudge due to sweat or lubricants. Use Vaseline sparingly when applying it.

Skin Doodler / Skin Surfer Skin Pens – Pack of 10 (Disposable, Freehand) Skin Doodler skin pens are disposable pens for freehand drawing directly on the skin—you can sketch out a design or adjust its placement and composition on the body before tattooing. Also known as Skin Surfer. The pack contains 10 pens; select your color from the options. At a Glance Brand / Model: Skin Doodler / Skin Surfer Skin Pens Contents: 10 disposable skin pens per pack Tip: 1-mm ball tip Dimensions: approx. 10.8 cm long, 1.6 mm thick (manufacturer’s specifications) Ink: Sterilized, consistent ink flow (manufacturer’s specifications) Usage: Freehand drawing directly on the skin; for single use Colors: Black, red, blue, purple, green (selectable options) Optional: Skin Doodler holder for a more comfortable grip Usage The 1-mm ball tip glides over the skin with minimal pressure without scratching—this allows you to draw clean lines instead of pressing them into the skin. Typical use: drawing a design freehand directly on the skin, adapting the lines to muscles and body contours, or tracing and adding to an applied stencil. Freehand drawing replaces or supplements stencil tracing—many artists use a stencil to draw the basic lines and then complete the rest freehand with the pen. Colors in Practice Using five colors isn’t an end in itself: You use color to clearly separate elements—such as structural lines, outlines, and shadow hints—and choose the contrast that best suits the skin tone. Black and blue are highly visible on most skin tones; red, green, and violet come in handy when black doesn’t provide enough contrast or when you want to distinguish between multiple layers. Hygiene and Compliance The pens are single-use: one pen per client, then discard. This reduces the risk of cross-contamination compared to sharing a marker. According to the manufacturer, the ink is sterilized and intended for use on the skin. It is a surface marker for outlining, not tattoo ink. Limitations and Comparison The drawn line sits on the skin and can smudge due to hand sweat or lubricants—so use sparingly when applying Vaseline. At 1.6 mm, the pen is very thin; for longer freehand mapping, the matching holder is worth using. The ball tip is ideal for fine, even lines; if you need wider strokes or soft shading, brush pens are the better choice. Both complement each other in the studio. FAQ Do I draw freehand with this, or is it a stencil? Freehand, directly on the skin. The pen replaces or supplements stencil tracing and is also suitable for tracing over an applied stencil. Are the pens suitable for every skin tone? Yes, depending on the color choice. On darker or tanned skin tones, a higher-contrast color provides better visibility than black. Disposable or reusable? Disposable. One pen per customer; dispose of it afterward. Do I need the Skin Doodler holder? Not necessarily. The pen is only 1.6 mm thick—but for longer periods of freehand work, the holder makes it more comfortable to use. Is the ink skin-safe and EU-compliant? The manufacturer specifies that the ink is sterilized and intended for use on the skin. No specific EU/REACH information or ingredient declaration is provided for this item (see product details or upon request). Does the drawn line smudge? It acts as a surface marker on the skin and may smudge due to sweat or lubricants. Use Vaseline sparingly when applying it.

Skin Doodler / Skin Surfer Skin Pens – Pack of 10 (Disposable, Freehand) Skin Doodler skin pens are disposable pens for freehand drawing directly on the skin—you can sketch out a design or adjust its placement and composition on the body before tattooing. Also known as Skin Surfer. The pack contains 10 pens; select your color from the options. At a Glance Brand / Model: Skin Doodler / Skin Surfer Skin Pens Contents: 10 disposable skin pens per pack Tip: 1-mm ball tip Dimensions: approx. 10.8 cm long, 1.6 mm thick (manufacturer’s specifications) Ink: Sterilized, consistent ink flow (manufacturer’s specifications) Usage: Freehand drawing directly on the skin; for single use Colors: Black, red, blue, purple, green (selectable options) Optional: Skin Doodler holder for a more comfortable grip Usage The 1-mm ball tip glides over the skin with minimal pressure without scratching—this allows you to draw clean lines instead of pressing them into the skin. Typical use: drawing a design freehand directly on the skin, adapting the lines to muscles and body contours, or tracing and adding to an applied stencil. Freehand drawing replaces or supplements stencil tracing—many artists use a stencil to draw the basic lines and then complete the rest freehand with the pen. Colors in Practice Using five colors isn’t an end in itself: You use color to clearly separate elements—such as structural lines, outlines, and shadow hints—and choose the contrast that best suits the skin tone. Black and blue are highly visible on most skin tones; red, green, and violet come in handy when black doesn’t provide enough contrast or when you want to distinguish between multiple layers. Hygiene and Compliance The pens are single-use: one pen per client, then discard. This reduces the risk of cross-contamination compared to sharing a marker. According to the manufacturer, the ink is sterilized and intended for use on the skin. It is a surface marker for outlining, not tattoo ink. Limitations and Comparison The drawn line sits on the skin and can smudge due to hand sweat or lubricants—so use sparingly when applying Vaseline. At 1.6 mm, the pen is very thin; for longer freehand mapping, the matching holder is worth using. The ball tip is ideal for fine, even lines; if you need wider strokes or soft shading, brush pens are the better choice. Both complement each other in the studio. FAQ Do I draw freehand with this, or is it a stencil? Freehand, directly on the skin. The pen replaces or supplements stencil tracing and is also suitable for tracing over an applied stencil. Are the pens suitable for every skin tone? Yes, depending on the color choice. On darker or tanned skin tones, a higher-contrast color provides better visibility than black. Disposable or reusable? Disposable. One pen per customer; dispose of it afterward. Do I need the Skin Doodler holder? Not necessarily. The pen is only 1.6 mm thick—but for longer periods of freehand work, the holder makes it more comfortable to use. Is the ink skin-safe and EU-compliant? The manufacturer specifies that the ink is sterilized and intended for use on the skin. No specific EU/REACH information or ingredient declaration is provided for this item (see product details or upon request). Does the drawn line smudge? It acts as a surface marker on the skin and may smudge due to sweat or lubricants. Use Vaseline sparingly when applying it.